Our Pro-Clad backing boards have been developed to have a low environmental impact and are non-combustible. It is quick to construct and suitable for old and new construction. 

PRO-CLAD 1 is our rectangular brick faced cladding system where the slips between the adjoining panels are fabricated on site once the panels have been installed.​
Pro-Clad 1 is our most competitive brick faced cladding system. It's most suited to vertical wall areas were repetition in the panel size is required, whilst the panels are still 95% off site fabricated.

PC1 as well as being BBA Certified, has also been fully tested independently by Lucideon to etag 034 standards. All products are also manufactured to ISO 9001:2015 managed quality control standards.

From receipt of construction drawings, Pro-Clad panel component set outs are raised for each area. 

Once manufactured and installed our product gives the appearance of continuous brickwork with no visible seem between panel joints. The fixings are hidden within the joints and the real brick finish is completed with the pointing material.
Pro-Clad™ can be used as a total or partial clad solution. On areas where brick slips need to be built adjacent to traditional brickwork, consistency of colour and finish can be maintained by ensuring bricks are collected from site, cut down in thickness before being fabricated onto the lightweight backing boards using a BBA approved resin
manufactured to our BBA Certified processes.

cladding panels

We work with you to come up with the very best panels for your challenges!

1
Pro Clad 1. Our rectangular brick faced cladding system where the slips between the adjoining panels are fabricated on site once the panels have been installed, more suited to vertical wall areas were repetition in the panel size is required, whilst the panels are still 95% off site fabricated. The pro-clad 1 is our most competitive brick faced cladding panel system

2
​Pro-Clad 2. Our interlocking cladding panel system where no on site fabrication of slips is required, suitable for vertical and soffit application the PC2 system is usually designed site specific to fit the areas required.

3
Pro-Clad 3. Developed from our PC2 system but with the addition of a mechanical fix to each slip alongside the resin bonded adhesion of the brick slips to our carry panel.

4
Pro-Lock. The same as our PC3 system but with the addition of Premium Rockpanel natural backing boards. This product too is a mechanical fix system.  ​

Our products are perfect for flood defence schemes

Pro Clad doesn't necessarily mean cladding your home or covering intricate parts of your building.

​With all the certification that comes with our Pro Clad product this is the ideal product to use on flood defence schemes or large commercial buildings. 

Flood defence schemes reduce the risk of tidal flooding to residents and businesses within the areas. 

Require more technical information?​

For more information on our Pro-Clad system our technical hub has everything including; Fitting, Technical Specifications & Brochures for you to read, download and print.